Hanyoyin Bibiyar Hanya
■ Yankin lalacewa na yau da kullun akan hanyoyin haɗin hanya yana kan saman da ke hulɗa da masu juyawa da masu aiki
TUSHEN DOGON GEFE MAI YAWAN GARI
■ Baya ga yanayin aiki, ƙasa mai tsayi ko kuma juyawa kwatsam akai-akai, wannan lalacewa na iya faruwa ne sakamakon rashin daidaiton layin dogo, yawan kama sarka ko kuma sarƙoƙi da suka lalace.
HUKUNCE-HUKUNCE A KAN LOKACIN DOGON KASA
■ Wannan yana faruwa ne sakamakon gogewar haƙoran sprocket a cikin mahaɗin saboda ƙasa mai lanƙwasa, sprocket da sarka mara daidai ko sarkar da aka lanƙwasa. Daidaita matsin lamba na sarka kuma duba daidaito.
Sawa a Gefen Boss PIN
■ Wannan yana faruwa ne sakamakon taɓawa da flange na waje na na'urorin juyawa na ƙasa. Idan ya faru kafin kashi 100 cikin 100 na lalacewa ta hanyar haɗin, to yana nufin na'urorin juyawa sun wuce lokacin amfaninsu kuma ya kamata a maye gurbinsu.
SANYA FUSKA MAI YAWAN GASKE
■Wannan lalacewa tana faruwa ne sakamakon toshe hanyoyin haɗin yanar gizo ko kuma yanayin aiki mai tsauri.
Amfani da masu tsaron hanya ko sanya sarƙoƙin SALT masu mai mai zai iya rage wannan lalacewa
SAKA BOSS NA PIN DAGA MASU GARGAƊI
■Wannan ya samo asali ne daga yawan yin amfani da sarkar da ke gogawa da masu tsaron hanya. Na'urorin da ke birgima a ƙasa da kuma aiki a kan tsaunuka masu tsayi na iya zama sanadin hakan.
■ Duba daidaiton sprocket ɗin kuma juya wasu na'urori masu juyawa zasu taimaka
AN YI GUZURIN DOGON DOGON
■ Yana faruwa ne sakamakon matsanancin girgizar ƙasa wanda galibi ana aika shi ta hanyar na'urorin juyawa zuwa hanyoyin haɗi
■Baya ga yanayin aiki (nauyi, gudu, nauyi da ƙarfin injin), yanayin na iya ta'azzara ta hanyar girman takalman da/ko matsin lambar hanya.
■ Maganin da za a iya bayarwa shine rage girman takalmin da/ko daidaita matsin lamba a sarkar
KARYA KO KARYAWAR WURAREN DA SUKA FI DA WAHALA
■ Yawancin karyewar na faruwa ne sakamakon matsin lamba da ke yaɗuwa zuwa tsarin haɗin gwiwa lokacin da aka yi amfani da injin a cikin aikace-aikacen mummunan tasiri.
■ Domin rage wannan gazawar, ana iya amfani da takalma masu kunkuntar kuma a riƙa daidaita matsin sarkar akai-akai
BUSHING COUNTERBORE DA PIN BOSS GROWING
■ Idan wannan ba ya faruwa ne saboda rashin amfani da kayan aiki ba daidai ba yayin haɗawa ko wargaza sarkar, to hakan yana faruwa ne ta hanyar lanƙwasawa a cikin fil da ciyayi.
■ Ana iya rage wannan matsala ta hanyar sanya ƙananan takalma da kuma samun daidaiton matsin lamba a sarkar
Lokacin Saƙo: Nuwamba-25-2025
